Effect of specimen thickness and punch diameter in shear punch testing

Download
  1. Get@NRC: Effect of specimen thickness and punch diameter in shear punch testing (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1179/cmq.2006.45.1.33
AuthorSearch for: ; Search for: ; Search for: ; Search for:
TypeArticle
Journal titleCanadian Metallurgical Quarterly
ISSN1879-1395
Volume45
Issue1
Pages3340; # of pages: 8
AbstractA good method to directly measure the mechanical properties of a material deformed in compression or torsion is by using the shear punch test. Unlike tensile testing, the shear punch test is not limited by specimen size or shape. However, it is unclear whether there is a limit to the allowable specimen thickness and punch diameter in order to attain (through conversion) tensile properties with reliability and accuracy. According to this study, it was found that the shear punch test was not sensitive to varying specimen thicknesses or punch diameters over a range of 200 to 400 μm and 1.5 to 5 mm, respectively.
Publication date
LanguageEnglish
AffiliationNRC Institute for Aerospace Research; National Research Council Canada
Peer reviewedYes
NPARC number21276075
Export citationExport as RIS
Report a correctionReport a correction
Record identifier221412cb-6b62-4c07-8eea-68d0829a1563
Record created2015-09-18
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)