Traceability of impulse test for diagnostic measurements of power apparatus

Download
  1. (PDF, 292 KB)
  2. Get@NRC: Traceability of impulse test for diagnostic measurements of power apparatus (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1109/CPEM.2014.6898418
AuthorSearch for: ; Search for:
TypeArticle
Proceedings title2014 Conference on Precision Electromagnetic Measurements (CPEM 2014)
Series titleCPEM Digest
ConferenceConference on Precision Electromagnetic Measurements (CPEM 2014), 24-29 August 2014, Rio de Janeiro
ISSN0589-1485
ISBN978-1-4799-5205-2
Pages380381; # of pages: 2
Subjectdivider; electro mechanical compatibility; impulse; measurement; shunt and uncertainty
AbstractThis paper describes the diagnostic measurements involved while performing impulse tests. For most applications during impulse tests, the impulse voltage and impulse current are measured. Because of the nature of impulse test it is very common that Electro Magnetic Interference signals (EMI) are generated. This EMI will influence the measurement. Therefore these tests are done in well-shielded high voltage laboratories. Also the relevant sensors e.g. voltage dividers, current shunts and other components used for the measurements, including traceability issues, will be discussed in this paper.
Publication date
PublisherIEEE
LanguageEnglish
AffiliationNational Research Council Canada; Measurement Science and Standards
Peer reviewedYes
NPARC number21274911
Export citationExport as RIS
Report a correctionReport a correction
Record identifier2bd13769-7479-4541-86ef-02b9a07174b7
Record created2015-04-28
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)