Mechanical property mapping of cold sprayed Ti splats and coatings

Download
  1. (PDF, 696 KB)
  2. Get@NRC: Mechanical property mapping of cold sprayed Ti splats and coatings (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1007/s11666-010-9546-4
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for:
TypeArticle
Journal titleJournal of Thermal Spray Technology
Volume20
Issue3
Pages486496; # of pages: 11
SubjectCold spray; Hardness mapping; Nanoindentation; Titanium
AbstractProfile nanoindentation and nanoindentation mapping were used to investigate the mechanical properties of commercially pure cold spray Ti splats and coatings deposited at increasing deposition velocities. Three regions in the cold spray Ti splats have been indentified: the impact region, the jetting region, and the upper splat region. The mechanical properties measured in these regions were tied to the cold spray deposition process with help of optical and scanning electron microscopes. The jetting region was observed to contribute to a metallurgical bonding of cold spray splats to cold spray splats and was measured to have low hardness in comparison to the splat impact site and similar to the hardness in the upper splat region. No increase in the profile coatings hardness with increase in the particle in-flight velocity and coating thickness was found. A correlation between the mechanical properties and the presently known deposition temperature, stress and dislocation density models was made.
Publication date
LanguageEnglish
AffiliationNRC Industrial Materials Institute; National Research Council Canada
Peer reviewedYes
NRC number52495
NPARC number16891231
Export citationExport as RIS
Report a correctionReport a correction
Record identifier2f7a4990-3903-454f-a4f7-8b9e0c7e2be4
Record created2011-02-20
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)