First results of numerical simulations of bergy bit collisions with the CCGS Terry Fox icebreaker

Download
  1. (PDF, 874 KB)
AuthorSearch for: ; Search for:
TypeArticle
Conference18th International Symposium on Ice, 28 August - 1 September 2006, Sapporo, Japan
Subjectnumerical simulation; bergy bit collision; CCGS Terry Fox icebreaker
AbstractNumerical simulations of a collision between the CCGS Terry Fox icebreaker and a bergy bit (1911 t glacial ice mass) have been conducted using LS-DynaTM software, which incorporates a full Navier-Stokes solver for the fluid component. First results compared favorably with actual data acquired during field tests in June, 2001. The simulations were run on a Beowulf cluster consisting of 15 high-performance CPU?s. The modeled volume, including the vessel, water and bergy bit, was meshed using AnsysTM software and contained approximately one million elements. A prior set of non-impact simulations of a model tanker transiting in proximity to model bergy bits showed that at least this number of elements was required. In the results presented here the vessel was traveling at 5 m/s and the impact occurred on the port side of the hull, in the region where the instruments were located during the field tests. A hard crushable foam material model was used for the bergy bit in order to model previously observed ice behavior where the ice contact interface consists of a relatively intact hard zone of ice surrounded by softer pulverized ice. The simulation produced reasonable values for the load, pressure and impact duration values obtained in the field.
Publication date
PublisherNRC Institute for Ocean Technology
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedYes
IdentifierIR-2006-47
NRC number6436
NPARC number8894928
Export citationExport as RIS
Report a correctionReport a correction
Record identifier3e5ab29b-ef4a-4238-afd1-693cce1f1774
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)