Design optimization using soft computing techniques for extrusion blow molding processes

  1. (PDF, 644 KB)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for:
Proceedings titleProceedings of 2002 NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing Technologies: 23-24 September 2002, London, Canada
Conference2002 NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing Technologies, 23-24 September 2002, London, Ontario, Canada
Subjectfuzzy logics; neural network; genetic algorithm; Taguchi; multidisciplinary design optimization
AbstractThe control of thickness distribution in extrusion blow molded parts is critical to assure product quality and reduce manufacturing cost. This study applies the soft computing strategy to determine the optimal die gap in the parison programming of extrusion blow molding process. Two types of optimization problem are addressed in this study. The process optimization objective is obtaining a uniform thickness of blown parts, and the design optimization objective is minimizing part weight subject to stress constraints. The finite element software, BlowView, is used to simulate the parison extrusion and the blow molding processes. However, the simulations are time consuming, and minimizing the number of simulation becomes an important issue. The proposed strategy, Fuzzy Neural-Taguchi and Genetic Algorithm (FUNTGA), first establishes a back propagation network using Taguchi's experimental array to predict the relationship between the design variables and the response. Genetic algorithm is then applied to search for the optimum design of parison programming. As the number of training samples is greatly reduced due to the use of orthogonal arrays, the prediction accuracy of the neural network model is closely related to the distance between sampling points and the evolved designs. The Reliability Distance is proposed and introduced to the Genetic Algorithm using fuzzy rules to modify the fitness function and thus improve search efficiency. The design of a HDPE bottle is used to illustrate the application of the process optimization, and the design of a gas tank is used to illustrate the application of performance. The design optimization uses ANSYS to find the stress distribution of blown parts under loads. The comparison of results using the optimization module of BlowView, Taguchi, and FUNTGA demonstrates the effectiveness of the proposed strategy.
Publication date
PublisherThe Workshop
AffiliationNational Research Council Canada
Peer reviewedYes
NPARC number23001683
Export citationExport as RIS
Report a correctionReport a correction
Record identifier40ca7c35-b646-4830-b458-b53df91cf3a0
Record created2017-03-17
Record modified2017-03-17
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)