Ultrasound-modulated optical imaging using a confocal Fabry-Perot interferometer and a powerful long pulse laser

Download
  1. (PDF, 638 KB)
DOIResolve DOI: http://doi.org/10.1117/12.807960
AuthorSearch for: ; Search for: ; Search for:
TypeArticle
Proceedings titleProceedings of the SPIE
ConferencePhotons Plus Ultrasound: Imaging and Sensing 2009. Session: Ultrasound Modulated (Acousto-Optical) Imaging I, January 25, 2009, San Jose, Californie, États-Unis
Volume7177
Pages71771E71771E-9; # of pages: 9
Subjectbiomedical imaging; ultrasound-modulated optical tomography; acousto-optical imaging; ultrasound-tagged photons; scattering media; confocal Fabry-Perot interferometer; pulsed single-frequency laser
AbstractUltrasound-modulated optical imaging combines the good spatial resolution of ultrasonic waves (mm scale) and the spectroscopic properties of light to detect optically absorbing objects inside thick (cm scale) highly scattering media. Light propagating in a scattering medium can interact with an ultrasonic wave thereby being tagged by a frequency shift equal to the ultrasound frequency or its harmonics. In this paper, a confocal Fabry-Perot interferometer(CFPI) is used as a tunable spectral filter to detect selectively the ultrasound-tagged photons. The CFPI allows obtaining high spectral resolution (MHz scale) while maintaining a high light gathering power when compared to other spectroscopic devices of comparable resolution. The contrast between the tagged photons and the untagged photons can be further enhanced by cascading CFPI. Moreover, the fast response of the CFPI allows performing measurements within the speckle decorrelation time typically encountered in biomedical applications. In this paper, the use of a single-frequency laser emitting powerful optical pulses allows illuminating the scattering medium only during the transit time of the probing ultrasonic pulses. Consequently, the acoustic and the optical power are both concentrated in time to enhance the signal-to-noise ratio of the tehcnique while remaining below the biomedical safety limits. The detection of optically absorbing objects (mm size) inside 30- and 60-mm thick scattering media is presented.
Publication date
PublisherSociety of Photo-Optical Instrumentation Engineers (SPIE)
Copyright noticeMaterial in this document is covered by the provisions of the Copyright Act, by Canadian laws, policies, regulations and international agreements. Such provisions serve to identify the information source and, in specific instances, to prohibit reproduction of materials without written permission.
LanguageEnglish
AffiliationNRC Industrial Materials Institute (IMI-IMI); National Research Council Canada
Access conditionavailable
unlimited
public
Peer reviewedYes
NRC number51058
NPARC number11012514
Export citationExport as RIS
Report a correctionReport a correction
Record identifier4126a37c-4d72-4081-9dd7-90f5687bb8a6
Record created2009-10-02
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)