Low-temperature noninjection approach to homogeneously-alloyed PbSexS1−x colloidal nanocrystals for photovoltaic applications

Download
  1. (PDF, 3 MB)
  2. (PDF, 1 MB)
  3. Get@NRC: Low-temperature noninjection approach to homogeneously-alloyed PbSexS1−x colloidal nanocrystals for photovoltaic applications (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1021/am200081m
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for:
TypeArticle
Journal titleACS Applied Materials & Interfaces
Volume3
Issue5
Pages15111520; # of pages: 10
SubjectDBPSe/TBPSe; thioacetamide (TAA); reducing agent; diphenylphosphine (DPP); homogeneously alloyed PbSexS1−x nanocrystals; quantum dots; photovoltaics
AbstractHomogeneously alloyed PbSexS1−x nanocrystals (NCs) with their excitonic absorption peaks in wavelength shorter than 1200 nm were developed for photovoltaic (PV) applications. Schottky-type solar cells fabricated with our PbSe0.3S0.7 NCs as their active materials reached a high power conversion efficiency (PCE) of 3.44%, with an open circuit voltage (Voc) of 0.49 V, short circuit photocurrent (Jsc) of 13.09 mA/cm2, and fill factor (FF) of 0.54 under Air Mass 1.5 global (AM 1.5G) irradiation of 100 mW/cm2. The syntheses of the small-sized colloidal PbSexS1−x NCs were carried out at low temperature (60 °C) with long growth periods (such as 45 min) via a one-pot noninjection-based approach in 1-octadecene (ODE), featuring high reaction yield, high product quality, and high synthetic reproducibility. This low-temperature approach employed Pb(oleate)2 as a Pb precursor and air-stable low-cost thioacetamide (TAA) as a S source instead of air-sensitive high-cost bis(trimethylsilyl)sulfide ((TMS)2S), with n-tributylphosphine selenide (TBPSe) as a Se precursor instead of n-trioctylphosphine selenide (TOPSe). The reactivity difference of TOPSe made from commercial TOP 90% and TBPSe made from commercial TBP 97% and TBP 99% was addressed with in situ observation of the temporal evolution of NC absorption and with 31P nuclear magnetic resonance (NMR). Furthermore, the addition of a strong reducing/nucleation agent diphenylphosphine (DPP) promoted the reactivity of the Pb precursor through the formation of a Pb−P complex, which is much more reactive than Pb(oleate)2. Thus, the reactivity of TBPSe was increased more than that of TAA. The larger the DPP-to-Pb feed molar ratio, the more the Pb−P complex, the higher the Se amount in the resulting homogeneously alloyed PbSexS1−x NCs. Therefore, the use of DPP allowed reactivity match of the Se and S precursors and led to sizable nucleation at low temperature so that long growth periods became feasible. The present study brings insight into the formation mechanism of monomers, nucleation/growth of colloidal composition-tunable NCs, and materials design and synthesis for next-generation low-cost and high-efficiency solar cells.
Publication date
LanguageEnglish
AffiliationNRC Steacie Institute for Molecular Sciences; NRC Institute for Microstructural Sciences; National Research Council Canada; NRC Institute for National Measurement Standards
Peer reviewedYes
NPARC number19739619
Export citationExport as RIS
Report a correctionReport a correction
Record identifier4b3d69f9-c541-409b-bf26-1ac91a8ad932
Record created2012-04-02
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)