Toward a Hand-Held Laser Range Scanner: Integrating Observation-Based Motion Compensation

Download
  1. (PDF, 1019 KB)
AuthorSearch for:
TypeBook Chapter
AbstractAlthough laser range sensors based on sequential scanning can provide accurate measurements in stable operation, the recovered surface geometry becomes noisy and distorted when sensors are hand-held. To compensate for camera motion, some currently existing prototypes integrate a positioning device. Unfortunately, these may not be accurate and fast enough. To circumvent this problem, a method that can compensate for motion distortion is proposed. The principle consists in using the measured shape geometry as a reference frame in 3-D space. The method is based on the collection of a redundant set of crossing profiles. Each surface profile is measured in a very short period of time such that distortion of the profile is negligible. It is assumed that the perturbation error due to motion, affects inter-profile positioning only. Then, the set of rigid crossing profiles are fitted together by moving them such as to minimize the profile intersection spacings. Experiments show that errors in the geometry can be reduced to the order of magnitude of the sensor error. The method can be integrated in the design of a hand-held sensor or as a complementary post-processing stage for improving measurement accuracy when using a sensor positioning device.
Publication date
LanguageEnglish
AffiliationNRC Institute for Information Technology; National Research Council Canada
Peer reviewedNo
NRC number41556
NPARC number8913555
Export citationExport as RIS
Report a correctionReport a correction
Record identifier4e35b64b-e5ce-485d-9573-30aa25dd1652
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)