Evaluation of measurement limits of transducer mountings in the ground

Download
  1. (PDF, 1 MB)
  2. Get@NRC: Evaluation of measurement limits of transducer mountings in the ground (Opens in a new window)
AuthorSearch for: ; Search for:
TypeArticle
Journal titleCanadian Acoustics/Acoustique Canadienne
ISSN0711-6659
Volume18
IssueSept. 3
Pages1527; # of pages: 13
Subjectvibrations; measuring instruments; Vibrations
AbstractThe distortion of ground vibration measurements by different methods for mounting transducers in the ground is investigated experimentally. The following mountings are considered: (i) Tapered stake having cruciform cross- section; (ii) Wood plate attached to the ground with threaded thin rods; and (iii) Embedded aluminum box of density equivalent to that of soil. The frequency range over which acceptable measurements of ground vibrations can be made is determined for each of these mountings using frequency response tests. These tests are performed by lightly impacting the mounting with a small instrumented hammer. The impact force and the response of the mounting were recorded and analyzed on a two-channel frequency analyzer. Tests were performed at two sites: stiff clay and fine loose sand. Results show that the frequency limit for acceptable accuracy was about 200 Hz for the plate and stake mountings, whereas that for the embedded box mounting was about 120 Hz. The plate and stake mountings were found more convenient to use that the embedded box mounting.
Publication date
LanguageEnglish
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
IdentifierIRC-P-1668
NRC number32336
1995
NPARC number20378076
Export citationExport as RIS
Report a correctionReport a correction
Record identifier652850d0-33bb-41df-9e97-60089682a64a
Record created2012-07-24
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)