Air tightness of fire dampers for smoke exhaust systems in high-rise buildings

Download
  1. (PDF, 1 MB)
  2. Get@NRC: Air tightness of fire dampers for smoke exhaust systems in high-rise buildings (Opens in a new window)
AuthorSearch for: ; Search for:
TypeArticle
Journal titleASHRAE Transactions
ISSN0001-2505
Volume90
Issue1B
Pages647654; # of pages: 8
Subjectsmoke vents; high rise buildings; dampers; air tightness; fire venting; smoke exhaust shaft; closed dampers air leakage characteristics; pre- and post- fire testing; fire safety; Air and vapour barriers
AbstractVenting the fire region of a building to the exterior significantly reduces smoke problems caused by a fire. This is often achieved by means of a smoke exhaust shaft with dampered openings on each floor. In the event of fire, the dampers at the top and on the fire floor are opened to exhaust smoke to the exterior. The performance of the smoke exhaust shaft is seriously affected by any extraneous air leakage through closed dampers located on the non-fire floors. Tests have been conducted before and after fire exposure to measure the air leakage characteristic of proprietory fire dampers currently used for smoke shaft application. The pre-fire test ratios of leakage area to damper area were generally below 2.5%. After exposure to the standard time-temperature, the ratios were generally below 4%. Restricting the maximum furnace temperature to 1000 degrees F (540 degrees C) considerably reduced the increase in leakage area ratio due to fire exposure.
Publication date
LanguageEnglish
AffiliationNRC Institute for Research in Construction; National Research Council Canada
NotePresented at the 1984 ASHRAE Winter Meeting, Atlanta, GA, USA, Jan 29-Feb 1, 1984
Peer reviewedYes
IdentifierDBR-P-1254
NRC number24050
3927
NPARC number20375256
Export citationExport as RIS
Report a correctionReport a correction
Record identifier741dd8d6-bc4d-4269-8fbf-da9b0152c92e
Record created2012-07-23
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)