A comparison between the NIST PJVS-based power standard and the NRC current: comparator-based power standard

Download
  1. Get@NRC: A comparison between the NIST PJVS-based power standard and the NRC current: comparator-based power standard (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1109/TIM.2014.2329386
AuthorSearch for: ; Search for: ; Search for: ; Search for:
TypeArticle
Journal titleIEEE Transactions on Instrumentation and Measurement
ISSN0018-9456
1557-9662
Volume64
Issue1
Pages1418
SubjectNIST; power measurement; reactive power; calibration; current measurement; temperature measurement
AbstractThis paper presents the results of a comparison of active/reactive power meter calibrations between the National Institute of Standards and Technology and National Research Council. The comparison was implemented using a transfer standard consisting of a highly stable commercial sampling-type power/energy meter. Active and reactive power measurements were made at 120 V, 5 A, 50 Hz, and 60 Hz. For active power, the measurements were made at applied current phase angles of 0°, +60°, and -60°. For reactive power, the measurements were made at applied current phase angles of +60°, +90°, -60°, and -90° . The results of the comparison indicate agreement to within the stated uncertainties of the participants.
Publication date
PublisherIEEE
LanguageEnglish
AffiliationMedical Devices; Measurement Science and Standards; National Research Council Canada
Peer reviewedYes
NPARC number23001456
Export citationExport as RIS
Report a correctionReport a correction
Record identifier746e2733-2864-49a0-8a38-3b165a170acd
Record created2017-02-13
Record modified2017-02-13
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)