Planing hull model tests for CFD validation

Download
  1. (PDF, 754 KB)
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for:
TypeArticle
Conference6th Canadian Marine Hydromechanics and Structures Conference. 23-26 May 2001, Vancouver, BC
AbstractA set of bare hull resistance tests were performed on a 1/8 scale model of an 11.8 m long planing hull. The model was tested over a range of speeds and ballast conditions in calm water. Measurements were made of tow force, running trim, and sinkage. Wetted areas and lengths were determined using underwater video. Flush mounted pressure taps gave gauge pressures at various locations on the hull surface. Wave profiles were measured using an array of capacitance probes positioned laterally in the tank. Boundary layer velocity profiles were resolved at two locations on the hull for several model speeds using a laser Doppler velocimeter (LDV). Selected results from the tests are presented.
Publication date
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedNo
IdentifierIR-2001-43
NRC number6370
NPARC number8895319
Export citationExport as RIS
Report a correctionReport a correction
Record identifier7810bf39-c2de-4bf6-9374-f298ab420b0a
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)