Fabrication and characterization of cermet supported cell with SDC electrolyte

Download
  1. Get@NRC: Fabrication and characterization of cermet supported cell with SDC electrolyte (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1149/1.2729182
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for:
TypeArticle
Journal titleECS Transactions
ISSN1938-5862
Volume7
Issue1
Pages899903; # of pages: 5
AbstractCermet supported cells with Sm0.2Ce0.8O1.9 (SDC) electrolyte have been developed and scaled up to 55mm x 55mm at NRC-IFCI. A solid oxide fuel cell with SDC electrolyte of 10µm in thickness and Ni-SDC anode of 15µm in thickness on a 0.8mm thick Ni-YSZ cermet substrate was fabricated by tape casting, screen printing, and co-firing. A composite cathode, 75 wt% Sm0.5Sr0.5CoO3 (SSCo) + 25 wt% SDC, approximately 50µm in thickness, was printed on the co-fired half-cell, and sintered at 1000{degree sign}C. The cell with effective cathode area of 16 cm2 showed a high electrochemical performance at 600{degree sign}C, and peak power density of 0.9W cm-2 was obtained with hydrogen fuel.
Publication date
LanguageEnglish
AffiliationNRC Institute for Fuel Cell Innovation; National Research Council Canada
Peer reviewedYes
NPARC number21276384
Export citationExport as RIS
Report a correctionReport a correction
Record identifier87c4115b-5de9-4678-9074-4c1b854aba0d
Record created2015-10-07
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)