Quality control in preparing masonry mortar

Download
  1. (PDF, 1 MB)
  2. Get@NRC: Quality control in preparing masonry mortar (Opens in a new window)
DOIResolve DOI: http://doi.org/10.4224/20378627
AuthorSearch for:
TypeTechnical Report
Series titleBuilding Practice Note; no. 5
ISSN0701-5216
Physical description6 p.
Subjectmortar; standards; quality control; safety factors; Mortar; Masonry
AbstractQuality control during mortar preparation can be improved by adherence to recommendations in Canadian Standards Association Standard A179 concerning on-site storage of materials, batching, and mixing procedures. The Specification contains a test method that will assist the mixer operator in determining sand bulking, and methods that the inspector can use to prepare specimens for compression tests and to determine the ratio between aggregate and cementitious material in fresh mortar. Proper use of these procedures and test methods will ensure more consistent mortar properties, improve the image of masonry in the eyes of the designer, minimize embarrassing colour variations, and could ultimately contribute to the reduction of safety factors in design codes.
Publication date
PublisherNational Research Council Canada. Division of Building Research
Translation of
  • Contrôle qualitatif de la préparation du mortier à maçonnerie
LanguageEnglish
AffiliationNational Research Council Canada
Peer reviewedNo
NRC numberNRC-IRC-1311
NPARC number20378627
Export citationExport as RIS
Report a correctionReport a correction
Record identifier93ba7acd-4e0b-4308-8b4f-71b61fdc413f
Record created2012-07-24
Record modified2017-07-06
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)