Metal-supported Solid Oxide Fuel Cell Operated at 400-600 degree C

Download
  1. Get@NRC: Metal-supported Solid Oxide Fuel Cell Operated at 400-600 degree C (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1016/j.jpowsour.2007.02.070
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for:
TypeArticle
Journal titleJournal of Power Sources
Volume167
Issue2
Pages336339; # of pages: 4
SubjectSolid oxide fuel cell; Metal-supported; Low-temperature; Pulsed laser deposition; Thin film; Cell performance
AbstractA metal-supported SOFC with a samarium doped ceria (SDC)/scandia-stabilized zirconia (ScSZ) bilayer electrolyte was fabricated by a combination of pulsed laser deposition (PLD) and wet ceramic processes. The cell performance and aging characteristics during operation were analyzed by both AC impedance spectroscopy and current-voltage measurements in the temperature range from 400 °C to 600 °C. The power generation characteristics of this metal-supported SOFC at low temperatures should allow for rapid start-up and help to reduce the performance deterioration seen in high temperature SOFCs due material oxidation and instability. In this paper, our early research results are presented.
Publication date
LanguageEnglish
AffiliationNational Research Council Canada; NRC Institute for Fuel Cell Innovation; NRC Industrial Materials Institute
Peer reviewedNo
NPARC number8900935
Export citationExport as RIS
Report a correctionReport a correction
Record identifiera01021ed-e436-415f-8595-3a32d1128bed
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)