Probabilistic analysis of local ice loads on a lifeboat measured in full-scale field trials

  1. (PDF, 1 MB)
  2. Get@NRC: Probabilistic analysis of local ice loads on a lifeboat measured in full-scale field trials (Opens in a new window)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for:
Journal titleJournal of Offshore Mechanics and Arctic Engineering
Article number41501
SubjectKinetics; Lifeboats; Sea ice; Different operating conditions; Exceedance probability; Full-scale field trials; Ice concentration; Pressure analysis; Probabilistic analysis; Risk-based design; Ice; kinetic energy; pack ice; ship design
AbstractThis paper presents an analysis of local ice loads measured during full-scale field trials conducted in 2014 with a totally enclosed motor propelled survival craft (TEMPSC) in controlled pack ice conditions. These data were collected as part of an ongoing research program that aims to identify the limitations of conventional TEMPSC operating in sea ice environments and to provide insight as to how these limitations might be extended. During the 2014 trials, local ice loads were measured at two locations on the TEMPSC's bow area. These loads were the most severe measured to date and corresponded to an average ice floe mass that was approximately 1.25 times the mass of the fully loaded TEMPSC. The event-maximum method of local ice pressure analysis was used to analyze these field data to improve understanding of the nature of ice loads for such interactions and to evaluate the suitability of this approach for design load estimation for TEMPSCs (i.e., lifeboats) in ice. The event-maximum method was adapted for the present application, so as to link exceedance probabilities with design load levels for a given scenario. Comparison of the 2014 results with a previous analysis of 2013 field trials data supports earlier conclusions that these interactions are highly influenced by kinetic energy, since more massive ice floes are observed to impart significantly higher loads on the lifeboats. Illustrative examples examining the influence of ice concentration and sail-away distance have also been provided. The work establishes links between extreme loads and the exposure of the lifeboat to ice for different operating conditions. Based on this work it is concluded that the event-maximum method provides a promising approach for establishing risk-based design criteria for lifeboats if field data are available which adequately represent ice conditions encountered during the design life of the lifeboat.
Publication date
PublisherAmerican Society of Mechnical Engineers
AffiliationOcean, Coastal and River Engineering; National Research Council Canada
Peer reviewedYes
NRC numberOCRE-PR-2014-008
NPARC number21275797
Export citationExport as RIS
Report a correctionReport a correction
Record identifieraf839bbf-9248-4c2f-bef9-f8a3da466a23
Record created2015-07-14
Record modified2016-05-27
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)