A preliminary study of the oxidation behavior of TBC with cold spray CoNiCrAlY bond coat

  1. (PDF, 1 MB)
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for:
ConferenceInternational Thermal Spray Conference, 2010-05-03, Singapore
AbstractCold gas dynamic spray (CGDS) utilizes a supersonic gas jet to accelerate fine solid powders above a critical velocity at which particles impact, deform plastically, and bond to the substrate material in the ambient environment. This process is potentially beneficial for thermal barrier coating (TBC) bond coat deposition because it would avoid oxidation of the feedstock powder that normally occurs when higher temperature thermal spray processes are employed. Therefore, there would be no prior aluminum depletion in as-deposited bond coats produced by the CGDS technique. This paper presents the oxidation behaviour of a TBC with CGDS-produced CoNiCrAlY bond coat, in comparison with TBCs with APS- and HVOF-CoNiCrAlY bond coats. Oxidation behaviors of these TBCs were evaluated in terms of microstructural evolution, kinetics of thermally-grown-oxides (TGO), as well as cracking behaviour during thermal exposure at 1050 °C.
Publication date
AffiliationNRC Industrial Materials Institute; National Research Council Canada; NRC Institute for Aerospace Research
Peer reviewedYes
NRC number52480
NPARC number16942899
Export citationExport as RIS
Report a correctionReport a correction
Record identifierb06877ee-6bee-48bd-b014-35182e5b5b32
Record created2011-03-07
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)