Estimating the contribution of impurities to the uncertainty of metal fixed-point temperatures

  1. Get@NRC: Estimating the contribution of impurities to the uncertainty of metal fixed-point temperatures (Opens in a new window)
DOIResolve DOI:
AuthorSearch for:
Journal titleInternational Journal of Thermophysics
AbstractThe estimation of the uncertainty component attributable to impurities remains a central and important topic of fixed-point research. Various methods are available for this estimation, depending on the extent of the available information. The sum of individual estimates method has considerable appeal where there is adequate knowledge of the sensitivity coefficients for each of the impurity elements and sufficiently low uncertainty regarding their concentrations. The overall maximum estimate (OME) forsakes the behavior of the individual elements by assuming that the cryoscopic constant adequately represents (or is an upper bound for) the sensitivity coefficients of the individual impurities. Validation of these methods using melting and/or freezing curves is recommended to provide confidence. Recent investigations of indium, tin, and zinc fixed points are reported. Glow discharge mass spectrometry was used to determine the impurity concentrations of the metals used to fill the cells. Melting curves were analyzed to derive an experimental overall impurity concentration (assuming that all impurities have a sensitivity coefficient equivalent to that of the cryoscopic constant). The two values (chemical and experimental) for the overall impurity concentrations were then compared. Based on the data obtained, the pragmatic approach of choosing the larger of the chemical and experimentally derived quantities as the best estimate of the influence of impurities on the temperature of the freezing point is suggested rather than relying solely on the chemical analysis and the OME method to derive the uncertainty component attributable to impurities. © 2014 Her Majesty the Queen in Right of Canada.
Publication date
AffiliationNational Research Council Canada (NRC-CNRC); Measurement Science and Standards (MSS-SME)
Peer reviewedYes
NPARC number21272235
Export citationExport as RIS
Report a correctionReport a correction
Record identifierc1297584-1add-40ac-99e5-e9cad08e10c0
Record created2014-07-23
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)