Accuracy Verification and Enhancement in 3D Modeling: Application to Donatello's Maddelena

Download
  1. (PDF, 1 MB)
AuthorSearch for: ; Search for: ; Search for: ; Search for:
TypeArticle
ConferenceProceedings of the Fourth International Conference on 3-D Digital Imaging and Modeling (3DIM), October 6-10, 2003., Banff, Alberta, Canada
AbstractThe three-dimensional acquisition and modeling of Donatello's Maddalena was started in order to create a methodology that aims at monitoring fragile wooden sculptures over the years. Hence a set of new approaches in 3D modeling was needed for obtaining the necessary metric reliability. The main focus of the work is modeling accuracy, therefore quality control procedures based both of the self check of 3D data and the use of complementary 3D sensors were developed for testing the model. Sensor fusion was also extensively used in order to correct a few alignment errors after the ICP phase leading to a not negligible overall metric discrepancy. All the steps of the acquisition procedure, from the project planning to the solution of the various technical and logistical problems are reported. Although few commercial systems claim to use a similar approach, for the first time, the non-invasive integration of photogrammetry and 3D scanning, specifically designed for applications in Cultural Heritage, is here extensively documented.
Publication date
LanguageEnglish
AffiliationNRC Institute for Information Technology; National Research Council Canada
Peer reviewedNo
NRC number47082
NPARC number8913776
Export citationExport as RIS
Report a correctionReport a correction
Record identifiercb9f00ff-e780-4121-a1cf-dea80cdb8cb8
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)