Qualisys Track Manager: User Manual

  1. (PDF, 804 KB)
DOIResolve DOI: http://doi.org/10.4224/8896115
AuthorSearch for:
TypeTechnical Report
Series titleLaboratory Memorandum
SubjectLinearization; Calibration; QTM
AbstractQTM software is a Windows based application, which takes information provided by ProReflex cameras and generates 2D, 3D, and/or 6 degree of freedom (DOF) data. If 3D or 6DOF data is obtained it can be viewed through a 3D viewing window. At least two cameras must be used in order to obtain 3D or 6DOF data. ProReflex cameras emit IR flashes of light, which are reflected by retro-reflective markers back to the cameras. The cameras recognize markers and relay information to QTM where it is processed and output appropriately.This report is intended as a guide through linearization, calibration, and capturing measurement processes. Error analysis concerning linearization and calibration are discussed within the report, while the set-up procedures are included in appendices. Also, the report describes QTMDAC, which is a modified version of QualiDAC. QTMDAC communicates with QTM and generates an analog output.
Publication date
PublisherNational Research Council Canada. Institute for Ocean Technology
PlaceSt. John's, NL
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedNo
NRC number6115
NPARC number8896115
Export citationExport as RIS
Report a correctionReport a correction
Record identifierde61d2e8-121c-49f7-868e-2ec8ac7175ba
Record created2009-04-22
Record modified2016-10-03
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)