Manufacturing problem contest [invited]

Download
  1. (PDF, 1 MB)
  2. Get@NRC: Manufacturing problem contest [invited] (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1364/AO.56.0000C1
AuthorSearch for: ; Search for: ; Search for: ; Search for:
TypeArticle
Journal titleApplied Optics
ISSN1559-128X
2155-3165
Volume56
Issue4
PagesC1
AbstractFor the Manufacturing Problem contest, participants were asked to fabricate on provided blank substrates a challenging filter with specific reflectance and transmittance targets covering a wavelength range from 400 nm to 1100 nm. The problem was selected such that to achieve a performance close to the targets, a submitted filter had to include at least one thin absorbing layer. Nine teams from six countries participated in the contest using different deposition techniques. The teams’ designs had a number of layers varying from 36 to 235, and a total thickness from 2.0 μm to 14.6 μm. The performances of all submitted filters were measured by two independent laboratories, and the results were presented at the Optical Interference Coating meeting in June 2016.
Publication date
PublisherOptical Society of America
LanguageEnglish
AffiliationInformation and Communication Technologies; National Research Council Canada
Peer reviewedYes
NPARC number23000907
Export citationExport as RIS
Report a correctionReport a correction
Record identifierf2bc54ff-8dcf-4f75-ae93-7582504ff62f
Record created2016-11-09
Record modified2016-11-15
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)