Optical simulation and fabrication of periodic triangular gratings for the enhancement of photovoltaic solar panels

  1. Get@NRC: Optical simulation and fabrication of periodic triangular gratings for the enhancement of photovoltaic solar panels (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1117/12.916786
AuthorSearch for: ; Search for: ; Search for: ; Search for:
Proceedings titleProceedings of SPIE - The International Society for Optical Engineering
ConferencePhysics, Simulation, and Photonic Engineering of Photovoltaic Devices, 23 January 2012 through 26 January 2012, San Francisco, CA
Article number82561Z
SubjectCost effective; Energy industry; Incident light; Incident light power; Incident power; Light-trapping; Micro-optical structure; Optical parameter; Optical performance; Optical simulation; Optical structures; Optical surfaces; Orientation angles; Photovoltaic; Photovoltaic panels; Photovoltaic performance; PV panel; PV performance; Solar panels; Top surface; Total internal reflections; Triangular gratings; Computer simulation; Microfabrication; Optimization; Photonic devices; Photovoltaic cells; Refractive index; Solar concentrators; Photovoltaic effects
AbstractThe solar energy industry strives to produce more and more efficient and yet cost effective photovoltaic (PV) panels. Integration of specific micro/nano optical structures on the top surface of the PV panels is one of the efficient ways to increase their PV performance through enhancing light trapping and in-coupling. In this study, periodic triangular gratings (PTGs) in polymethyl methacrylate (PMMA) were numerically simulated and optimized. The goal of this study is to enhance the ability of solar panels to convert maximum obtainable amount of solar energy by improving the optical in-coupling of light to PV material. Initial optical simulation results shown that a flat PV panel (without any enhancing micro-optical structures) exhibits an average incident light power of 0.327 W over a range of the incident light angles between 15° and 90°. Introduction of the PTG allows capturing the incoming sunlight and reflecting it back onto the PV material for a second or more chances for absorption and conversion into electricity. The light trapping and redirection is achieved through the total internal reflection (TIR) phenomenon. Geometry of the PTG was initially optimized with respect to an incident sunlight orientation of 15°, 30°, 45°, 60°, 75°, and 90°. Optical performance of the particular optimized PTGs was analyzed over daylight conditions and several optical parameters, such as average incident power and intensity, were calculated when sunlight orientation angle was changing from 15° to 90°. By adding the PTG optimized for 15° incidents light, an average incident power of 0.342 W was achieved (4.6% improvement of optical performance). Functional PTG prototypes were fabricated with optical surface quality (below 10 nm R a). The simulation results allow understanding how the overall daytime photovoltaic performance of solar panels can be improved. © 2012 SPIE.
Publication date
AffiliationNational Research Council Canada (NRC-CNRC); Automotive (AUTO-AUTO)
Peer reviewedYes
NPARC number21269536
Export citationExport as RIS
Report a correctionReport a correction
Record identifierf9846fbd-62c3-45a9-b346-6e893cc4388b
Record created2013-12-12
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)