Results of numerical simulations of growler impact tests

Download
  1. Get@NRC: Results of numerical simulations of growler impact tests (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1016/j.coldregions.2007.03.016
AuthorSearch for:
TypeArticle
Journal titleCold Regions Science and Technology
Volume49
Issue3
Pages206214; # of pages: 9
SubjectNumerical simulation; Growler impacts
AbstractNumerical simulations of a collision between free-floating growlers (1068 kg glacial ice mass) and a heavy apparatus (i.e. impact plate), similar to a ship bow, have been conducted using LS-Dyna? software, which incorporates a full Navier?Stokes solver for the fluid component. The results compared favorably with actual data acquired during tests in IOT's Ice Tank using real growlers. The simulations were run on a Beowulf cluster consisting of 15 high-performance CPU's. The modeled volume, including the impactor, water and growler, was meshed using Ansys? software and contained approximately one million elements. A prior set of non-impact simulations of a model tanker transiting in proximity to model bergy bits showed that at least this number of elements was required. In the results presented here the impactor was traveling at 2 m/s. A hard crushable foam material model was used for the growler in order to model previously observed ice behavior where the ice contact interface consists of a relatively intact hard zone of ice surrounded by softer pulverized ice. The simulation produced reasonable values for the load, pressure and impact duration values obtained in the actual growler experiments. Nominal pressure did not show a dependence on nominal contact area. It was notable that the same relatively simple hard crushable foam model used for the growler material properties was also successful in yielding reasonable results for simulations of full-scale impacts of a ship with bergy bits [Gagnon, R.E. and Derradji-Aouat, A., 2006. First Results of Numerical Simulations of Bergy Bit Collisions with the CCGS Terry Fox Icebreaker. Proceedings of IAHR 2006, Sapporo, Japan.]
Publication date
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedYes
IdentifierIR-2006-30
NRC number6380
NPARC number8894931
Export citationExport as RIS
Report a correctionReport a correction
Record identifierfcd571a3-faac-4844-b2c5-10a2b06fcc3e
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)