Effects of changes in hub geometry on the performance of podded propellers in cavitating and non-cavitating open water conditions

Télécharger
  1. (PDF, 554 Ko)
AuteurRechercher : ; Rechercher : ; Rechercher : ; Rechercher :
TypeArticle
Conférence7th Canadian Marine Hydromechanics and Structures Conference, 20-21 September 2005, Halifax, NS
RésuméThere are several possible explanations for the difference in performance of puller and pusher type podded propulsors. One is related to the difference in the hub geometry (hub taper angle). Puller and pusher propellers have opposite hub taper angles, hence different hub and blade root shapes. Results are presented here of an experimental study focused on the variation in performance of pusher and puller propellers with the same blade sections, but different hub taper angles, both in cavitating and noncavitating open water conditions. In the first phase of the study, three model propellers with different hub taper angles were tested in open water conditions. In the second phase, a similar study was carried out in a cavitation tunnel. Both of the studies were done to investigate the effect of hub taper angle on performance at different operating conditions. The open water propeller data is used to provide a comparison with the cavitation performance. From the open water study, it is concluded that hub taper angle has a significant effect on propulsive performance, especially at the highly loaded condition, where the puller propellers perform better than the pusher ones. From the cavitation tunnel study, it is concluded that the puller configuration propellers do not have better performance than the pusher configuration propellers under all cavitating conditions.
Date de publication
AffiliationInstitut des technologies océaniques du CNRC; Conseil national de recherches Canada
Publications évaluées par des pairsNon
IdentificateurIR-2005-21
Numéro du CNRC6284
Numéro NPARC8895012
Exporter la noticeExport en format RIS
Signaler une correctionSignaler une correction
Identificateur de l’enregistrement4a8e4322-72e8-4a67-b4f1-fb8cb46fc9e6
Enregistrement créé2009-04-22
Enregistrement modifié2016-05-09
Mettre en signet et diffuser
  • Partagez cette page avec Facebook (Ouvre dans une nouvelle fenêtre)
  • Partagez cette page avec Twitter (Ouvre dans une nouvelle fenêtre)
  • Partagez cette page avec Google+ (Ouvre dans une nouvelle fenêtre)
  • Partagez cette page avec Delicious (Ouvre dans une nouvelle fenêtre)
Date de modification :